BJMPY - INDUSTRIAL OIL TH 32 (CPS 253018)

Product Identification

Product ID:INDUSTRIAL OIL TH 32 (CPS 253018)
MSDS Date:06/24/1986
FSC:9150
NIIN:00N011405
MSDS Number: BJMPY

Responsible Party
CHEVRON ENVIRONMENTAL HEALTH CENTER INC
15299 SAN PABLO AVE.
RICHMOND, CA 94804-0054
US

Emergency Phone: 415-233-3737

Info Phone: 415-233-3737

Cage: 0AHD1

Contractor
CHEVRON ENVIRONMENTAL HEALTH CENTER INC
4054 RICHMOND, CA 94804 US

Telephone: 800-582-3835

Cage: 0AHD1

Ingredients

HIGHLY REFINED BASE OILS

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: >99%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)


ADDITIVES INCLUDING POUR DEPRESSANT, DEFOAMER, ANTIRUST

Fraction By Weight: <1%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN:EXPECTED TO CAUSE NO MORE
THAN MINOR EYE/SKIN IRRIT FOLLOWING PRLNGD/FREQUENTLY RPTD CONTACT.
INHAL:NOT EXPECTED TO BE ACUTELY TOXIC BY INHAL. BRTHG MINERAL OIL
MIST AT CONC IN AIR THAT EXCEE D RECOMMENDED EXPOS STANDARD CAN
CAUSE RESP IRRIT/DISCOMFORT. INGEST:NOT EXPECTED TO BE ACUTELY
TOXIC BY INGESTION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SIGNS & SYMPTOMS OF RESP TRACT IRRIT MAY
INCLUDE, BUT MAY NOT BE LIMITED TO, ONE OR MORE OF THE FOLLOWING,
DEPENDING ON CONCENTRATION & LENGTH OF EXPOSURE:NASAL DISCHARGE,
SORE THROAT, COUGHING, BRONC HITIS, PULMONARY EDEMA AND DIFFICULTY
IN BREATHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH IMMED W/FRESH WATER FOR 15 MIN WHILE HOLDING LIDS
OPEN.IF IRRIT PERSISTS, SEE MD. SKIN:WASH THORO W/SOAP & WATER.
LAUNDER CONTAM CLTHG. INHAL:IF RESP DISCOMFORT/IRRIT OCCURS, MOVE
TO FRESH A IR. SUPPORT BRTHG (GIVE O*2/ARTF RESP),SEE MD IF COND
PERSISTS . INGEST:GIVE WATER/MILK TO DRINK/CALL MD.CONSULT MD
BEFORE INDUCING VOMIT.IF MD CANNOT BE OBTAINED TAKE PERSON & CNTR
TO HOSPITAL

Fire Fighting

Flash Point Method:COC
Flash Point:415F,213C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:FOR FIRES INVOLVING MATL, DO NOT ENTER
ENCLOSED, CONFINED FIRE SPACE W/O PROPER NIOSH/MSHA APPROVED SCBA
TO PROTECT AGAINST HAZ EFTS OF NORMAL (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:DO NOT WELD, HEAT OR DRILL CONTAINER.
RESIDUE MAY IGNITE WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.

Accidental Release

Spill Release Procedures:STOP SOURCE OF LEAK/RELEASE. CLEAN UP AS SOON
AS POSSIBLE. CONTAIN LIQUID TO PREVENT FURTHER CONTAM OF SOIL,
SURFACE WATER OR GROUNDWATER. CLEAN UP SMALL SPILLS USING
APPROPRIATE TECHNIQUES SUCH AS SO RBENT MATLS OR PUMPING (SEE SUPP
DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT WELD,HEAT,DRILL CNTR. RESIDUE
MAY IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Other Precautions:DO NOT USE PRESSURE TO EMPTY DRUM OR EXPLOSION MAY
RESULT.

Exposure Controls

Respiratory Protection:IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRATIONS WHICH EXCEED RECOMMENDED EXPOSURE STANDARD, USE OF A
NIOSH/MSHA APPROVED RESPIRATOR IS RECOMMENDED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP AIRBORNE CONCENTRATIONS OF
MATERIAL BELOW RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:USE IMPERVIOUS GLOVES .
Eye Protection:CHEM WORKERS GOGGLES,FACESHLD/OPT
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
FIRE FIGHT PROC:PRODUCTS OF COMBUSTION OR OXYGEN DEFICIENCY. SPILL
PROC:WHERE FEASIBLE AND APPROPRIATE, REMOVE CONTAMINATED SOIL.
FOLLOW PRESCRIBED PROCEDURES FOR REPORTING AND RESPONDING TO LARGER
RE LEASES.

Chemical Properties

Spec Gravity:0.87 @15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON DIOXIDE
AND WATER VAPOR; INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.

Disposal

Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS & DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.
CONTACT LOCAL ENVIRONMENTAL OR HEALTH AUTHORITIES FOR APPROVED
DISPOSAL OF THIS MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.